OCTURA HARDWARE RANGE: INCLUDES COUPLINGS,CABLE, TEFLON OUTER TUBING, LEAD TEFLON BEARINGS,NEEDLE BEARINGS,THRUST WASHERS & BALL THRUST BEARINGS, STREAMLINED PROP NUTS, FLEX FERRULES, DRIVE DOGS,PROP SHAFTS, UNIVERSAL COUPLINGS,FLYWHEELS,COLLETS, STARTER BELTS, PUSHROD SEALS, EXHAUST COUPLINGS, WEDGE RUDDER, STRUDDER ASSEMBLIES,STRUT, WATER PICK UPS,SCREWS & NUTS.
| OCTURA | FLEX-HEX COUPLINGS | ||
| THREAD |
FITS FLEX CABLE |
||
| OCFHE18098 | 1/8" Smooth | 0.098 dia round | $20.39 |
| OCFHE18062 | 1/8" Smooth | 1/16" wire drive | $20.39 |
| OCFHE1813 | 1/8" Smooth | .130 dia round | $20.39 |
| OCFHE532098 | 5/32" Smooth | .098 dia round | $19.34 |
| OCFHE31613 | 3/16" Smooth | .130 dia round | $20.39 |
| OCFHE31615 | 3/16" Smooth | .150 dia round | $20.39 |
| OCFHE5MM13 | 5mm Smooth | .130 dia round | $19.34 |
| OCFHE5MM15 | 5mm Smooth | .150 dia round | $20.39 |
| OCFHE5MM18 | 5mm Smooth | .187 dia round | $19.34 |
| OCFHE5MM062 | 5mm Smooth | 1/16" wire drive | $20.39 |
| OCFHE1413 | 1/4" Smooth | .130 dia round | $17.42 |
| OCFHE1415 | 1/4" Smooth | .150 dia round | $19.34 |
| OCFHE1418 | 1/4" Smooth | .187 dia round | $20.39 |
| OCFH0656Q | 6mm | .187 square | $22.28 |
| OCFH0315 | 10/32 threaded | .150 dia round | $13.20 |
| OCFH1413 | 1/4-28 threaded | .130 dia round | $17.58 |
| OCFH1415 | 1/4-28 threaded | .150 dia round | $17.58 |
| OCFH1418 | 1/4-28 threaded | .187 dia round | $17.58 |
| OCFH51618 | 5/16-24 threaded | .187 dia round | $22.03 |
| OCFH6mm18 | 6mm threaded | .187 dia round | $17.42 |
| OCFH7mm18 | 7mm threaded | .187 dia round | $17.42 |
| OCFH8mm18 | 8mm threaded | .187 dia round | $17.42 |
| OCFHP6518 | Picco 65/80/90 | .187 dia round | $17.42 |
| OCFHP6525 | Picco 65/80/91 | .250 dia round | $20.39 |
| OCFH1425 | 1/4-28 threaded | .250 dia round | $19.82 |
| OCFH51625 | 5/16-24 threaded | .250 dia round | $22.03 |
| OCFH6mm25 | 6mm threaded | .250 dia round | $19.82 |
| OCFH8mm25 | 8mm threaded | .250 dia round | $22.03 |
| OCFH09025 | OPS 90-10mm | .250 dia round | $20.39 |
| FLEXIBLE CABLE OFF ROLL | |||
| OC098L | .098 Dia Flex Cable | Standard per meter | $5.85 |
| OC130L | .130 Dia Flex Cable | Standard per meter | $6.63 |
| OC150L | .150 Dia Flex Cable | Standard per meter | $6.89 |
| OC187L | .187 Dia Flex Cable | Standard per meter | $8.52 |
| 0C250L | .250 Dia Flex Cable | Standard per meter | $21.20 |
| OCTURA CABLE PACKET. | |||
| OC130L-24A | 24" .130 Dia Flex Cable, | left lay | $5.17 |
| OC150L-24A | 24" .150 Dia Flex Cable | left lay | $5.40 |
| OC250L-24A | 24" .250 Dia Flex Cable | left lay | $18.14 |
| OCO98L-24 | 24" .098 Dia Flex Cable | left lay | $4.59 |
| OC6SQL-24A | 24" .187 Dia Flex Cable, | left lay, one end sq | $13.66 |
| OC6SQL-24B | 24" .187 Dia Flex Cable, | left lay, one end sq + 24" tubing | $20.32 |
| OC8SQL-36 | 36" .250 Dia Flex Cable, | left lay, both end sq | $25.14 |
| OC8SQR-24A | 24" .250 Dia Flex Cable, | right lay, one end sq | $18.25 |
| OC8SQL-24A | 24" .250 Dia Flex Cable, | left lay, one end sq | $18.25 |
| OC8SQL-24B | 24" .250 Dia Flex Cable, | left lay, one end sq + 24" tubing | $24.57 |
| TEFLON OUTER | TUBING OFF THE ROLL | ||
| OC98T.240 | For .098 Dia Flex Cable, per meter | $5.49 | |
| OC130T .130 ID | For .130 Dia Flex Cable, per meter | $8.69 | |
| OC150T .150 ID | For .150 Dia Flex Cable, per meter | $8.69 | |
| OC187T.187 ID | For .187 Dia Flex Cable, per meter | $9.72 | |
| OC250T .250 ID | For .250 Dia Flex Cable, per meter | $12.56 | |
| LEAD TEFLON BEARINGS | |||
| OC4LTS | 1/8" OD X 3/16" OD - 3/16" | Long | $2.84 |
| OC6LTS | 3/16" ID X 1/4" OD - 3/8" | Long | $3.04 |
| OC6LTSB PKT | 3/16" ID X 1/4" OD - 3/8" | Long, (5 per pkt) | $12.98 |
| OC8LTS | 1/4" ID X 5/16: OD - 3/8" | Long | $4.66 |
| OC8LTSB PKT | 1/4" ID X 5/16: OD - 3/8" | Long, (5 per pkt) | $18.10 |
| NEEDLE BEARINGS | |||
| OC6NE | 3/16" ID x 11/32" OD | $16.28 | |
| OC8NE | 1/4" ID x 7/16" OD | $16.38 | |
| THRUST WASHERS | |||
| OC4TW | 2 x metal & 2 moly-nylon - | 1/8" ID x 1/4" OD | $3.00 |
| OC6TWM | 2 x hardened steel & 2 - 3/16"ID - 3/8"OD | moly-nylon | $5.94 |
| OC6TW | 2 x hardened steel & 2 - 3/16"ID - 7/16" OD | moly-nylon | $6.21 |
| OC8TW | 2 x steel & 2 moly-nylon -1/4"ID - 1/2" OD | $6.62 | |
| BALL THRUST BEARINGS | |||
| OC6TB | 3/16" ID X 7/16: OD | $25.70 | |
| OC8TB | 1/4" ID X 1/2" OD | $25.94 | |
| STREAMLINED | PROP NUTS | ||
| OC6PNM | 3/8" OD | 10-32 Thread | $5.43 |
| OC6PNMU | 3/8" OD | Un Threaded 3/16" shaft | $5.43 |
| OC6PNMS | 3/8" OD | 10-32 Thread | $5.43 |
| OC8PNM | 3/8" HEX OD | 1/4 - 28 Thread | $4.65 |
| OC8PNU | 7/16" OD | Un Threaded 1/4" shaft | $5.69 |
| OC6PN | 7/16" OD | 10-32 Thread | $6.54 |
| FLEX FERRULES | |||
| OCFSF616 | .187 Cable to .187 Shaft 3/8" OD | $6.77 | |
| OCFSF1818 | .187 Cable to .187 Shaft 7/16" OD | $7.46 | |
| OCFSF2518 | .250 Cable to .187 Shaft 7/16" OD | $7.46 | |
| OCFSF2525 | .250 Cable to .250 Shaft 7/16" OD | $7.46 | |
| DRIVE DOGS | |||
| OC4D | 1/8" ID X 1/4" OD incl 4-40 set screw, | Brass | $5.09 |
| OC6DM | 3/16" ID X 3/8" OD incl 8-32 set screw, | Steel | $5.00 |
| OC6DD | 3/16" ID X 7/16" OD incl two 8-32 set screw, | Steel | $6.48 |
| OC6DMM | 3/16" ID X 5/16' OD incl 4-40 set screw, | Steel | $5.56 |
| OC6D | 3/16" ID X 7/16" OD incl 8-32 set screw, | Steel | $5.78 |
| OC6D5 | 5mm ID X 7/16" OD incl 8-32 set screw, | Steel | $5.56 |
| OC6DT | 3/16" ID X 7/16"-3/8" tapered OD, 8-32 set screw, | Steel | $5.56 |
| OC8D | 1/4" ID X 1/2" OD incl two 8-32 set screw, Steel | $6.95 | |
| OC6DH | 3/16" ID X 7/16" OD incl 8-32 set screw, | Steel | $6.95 |
| PROP SHAFTS | WITH DRIVE DOG | ||
| OC6PS | 3/16" OD 3 1/8" Long | 7/16"OD Drive dog | $7.86 |
| OC6PSH | 3/16" OD 3 1/2" Long 7/16" | OD Drive dog | $15.40 |
| OC6PSM | 3/16" OD X 3 1/8" Long | 3/8" OD Drive dog | $7.86 |
| OC6PSL | 3/16" OD X 4 1/4" Long | 7/16" OD Drive dog | $14.59 |
| OC6PSHM | 3/16" OD X 3 1/2" Long | 3/8" OD Drive Dog | $15.75 |
| OC8PS | 1/4" OD X 4 1/2" Long 1/2" | OD Drive dog | $21.05 |
| OC68PS | 1/4" OD Stepped Down to | 3/16" prop | $22.03 |
| OC8PSH | 1/4" OD X 4" Long | unthreaded 1/2" OD Drive Dog | $25.00 |
| OC6062PS | 3/16" OD - 2 1/4" Long | Counter bored for 1/16" wire Drive | $19.25 |
| UNIVERSAL COUPLINGS | |||
| HDSTD | 5/16"-24 to 3/16" OD Shaft | $17.86 | |
| STD 6MM-.187 | 6mm to 3/16" Dia Shaft | $17.86 | |
| OC610M | 1/4 -28 Thread to 3/16" ID Shaft | $17.86 | |
| OC610ML | 3/16" ID X 7/16" OD 1/4" Longer male end joint | $17.86 | |
| OC610SB | 3/16" Smooth Shaft, 1 Male, 1 Female universal | $19.25 | |
| OC810SBD | 1/4" Smooth Shaft 1 male, 1 female universal | $19.25 | |
| FLYWHEELS | |||
| "15" | With 1/4" Collet | $21.03 | |
| "30DR | With 1/4" Collet | $21.22 | |
| "45DR | With 1/4" Collet | $23.58 | |
| 45 K&B | With K & B Collet | $56.72 | |
| "60" | With 1/4" Collet | $27.85 | |
| FLYWHEEL | COLLETS | ||
| 1/4" | $4.68 | ||
| 5/16" | $4.68 | ||
| 5mm | $4.68 | ||
| 6mm | $4.68 | ||
| 7mm | $4.68 | ||
| 8mm | $4.68 | ||
| K&BS | $4.68 | ||
| K&BM | $4.68 | ||
| OS40 | $4.68 | ||
| OC10FS | Fly Wheel Spaces | 1/4" Bore & 5/16" bore | $2.25 |
| STARTER BELTS | |||
| SMALL | $8.00 | ||
| MEDIUM | $10.00 | ||
| LARGE | $11.25 | ||
| PUSHROD SEALS | |||
| BRU-LINE | 2 per pack | $11.04 | |
| REDUCING BUSHES | |||
| OC68RB | 3/16" ID X 1/4" OD | For Props | $4.73 |
| OC8RB | 1/4" ID X 11/32" OD | Flanged | $4.56 |
| OC10RB | 5/16" ID X 11/32" OD | Flanged | $4.93 |
| OC10RB 916 | 5/16" ID X 7/16" OD | Flanged | $4.42 |
| HUMM-DINGER MOTOR MOUNTS | |||
| IV45 3.5 | For 4" Rails | fits .21 | $86.00 |
| IV45 7.5 | For 4" Rails | fits .21 - 45 | $86.00 |
| V65 7.5-11cc | For 5" Rails | fits 7.5 - 11cc | $74.83 |
| V90 11-15cc | For 5" Rails | fits 11 - 15cc | $92.82 |
| SWIFT SWITCH 40-80 | For 5" Rails | $32.47 | |
| TWIN 60 | For 6" Rail | fits two 7.5 - 11cc | $35.13 |
| MOTOR MOUNT INSERTS | |||
| IV45 I/O 3.5 | Insert Only | $20.12 | |
| IV45 11CC | Insert Only | $20.12 | |
| IV45 I/O 7.5 | Insert Only | $20.12 | |
| V65 I/O 7.5-11cc swift-switch | Insert Only | $20.12 | |
| V90 I/O 11-15cc | Insert Only | $40.07 | |
| MOTOR MOUNT RUBBERS | |||
| SMALL | 3.5cc - 7.5cc | $23.52 | |
| LARGE HD | 15cc plus | $43.66 | |
| SILICONE | EXHAUST COUPLINGS | ||
| OC16HTEC | 1/2" ID 3" Long Reinforced High Temp | $8.39 | |
| OC20HTEC | 5/8" ID 3 " Long reinforced High Temp | $9.43 | |
| OC24HTEC | 3/4" ID 3" Long reinforced High Temp | $9.35 | |
| OC28HTEC | 7/8" ID 3" Long reinforced High Temp | $9.92 | |
| OC32HTEC | 1" ID 3" Long reinforced High Temp | $10.65 | |
| WEDGE RUDDER ASSEMBLIES | |||
| OC6WRL | Rudder Assembly | .60 boat or larger | $33.47 |
| WRBOL | Blade Only | Without W/P | $16.83 |
| OC6WRBR | Mount Bracket | .60 boat or larger | $13.29 |
| WRBOLL | Blade Only | With W/P on left | $15.16 |
| WRBOLO | Blade Only | With W/P on right | $15.16 |
| WRBOLOX 7 7/8" | Blade Only - 1 7/78" | With W/P on right | $17.33 |
| WRBOLOX | Blade Only | With W/P on right | $10.28 |
| OC6WR40 | Blade only with water | pickup slot on trailing edge | $86.37 |
| STRUDDER ASSEMBLIES | |||
| STRUDM | Strudder M combination | Strut & water Pickup | $63.00 |
| STRUDUM SS BLADE | Strudder M | $105.68 | |
| STRUDOFF | Offset Strudder M | $76.10 | |
| STRUD75 | Strudder M with 7.5 deg angle | $67.21 | |
| OC6STR-130DA | ALUM STRDR - Complete | kit ready to install | $149.45 |
| OC8NP NOSE PIECE | Nose piece for strudder M | $3.06 | |
| OC6PIBR | Strudder rudder PIVOT | BRACKET | $12.09 |
| OC6PIBRD DELUX PIVOT BRKT. | Strudder rudder PIVOT | BRACKET DELUX | $33.53 |
| OC6PISH PIVOT SHAFT | Strudder rudder PIVOT SHAFT 3/16" | $3.36 | |
| TA1 | Tiller Arm for flat rudders | $3.00 | |
| TA2 | Tiller Arm for Strudder M | $3.00 | |
| BRASS TILLER ARM | Tiller Arm for 3/16" Rudder Shaft | $12.09 | |
| STRUTS | |||
| SDAS | Adjustable Strut | Surface, ready to install | $63.07 |
| SDBO | Blade only | for SDAS | $17.96 |
| DVBO | Strut Blade | $15.68 | |
| DVMAS | Adjustable Strut | Deep Vee | $63.05 |
| DVMBO | Blade Only | For STRUDM & DVMAS | $17.96 |
| OC8SBE2 | Bronze Blade | Large | $56.77 |
| SSSLBO | S/S Blade Only | Long for STRUDM | $71.00 |
| SSSBO | S/S Blade Only | Short for STRUDM | $39.92 |
| SSSS | S/S Blade Only | Short | $57.38 |
| SSASBO | Aluminuim | Short for STRUDM | $34.43 |
| SSALBO | Aluminuim | Long for STRUDM | $37.77 |
| SUSTRUT | Bronze Blade | 2 1/4" long, 1/1/2" wide w/bearings | $44.67 |
| OCOB35 I/O | For 3.5 outboard | $26.73 | |
| OCOB75 I/O | For 7.5 outboard | $26.73 | |
| OC6STBR | Strudder Bracket | Aluminum | $29.06 |
| OCOFFSET | Strudder Offset Conversion | Aluminum | $31.25 |
| OC6SB40- STRUT | BLADE | S/S Blade Only | $40.00 |
| OC6SBR-40A STRUT BRACKET | Aluminuim | for .45 size nitro boat w/bearings | $42.53 |
| KOOL KLAMPS | No.7, No.10, No.11, | No.12 | $18.08 |
| OC11BE BEARING | EXTENDER | $3.12 | |
| WATER PICK UPS | |||
| OCSW | Water Pick up, Brass with Nylon washer & 10-32 nut | $6.91 | |
| OCSWP | Water Pick up & Outlet Brass with Nylon washer & 10-32 nut | $9.75 | |
| SMWP | Stern Mount Water Pick Up, Beryllium copper | $25.55 | |
| #71 | Water Pick up & Outlet, Brass with M/C & nylon washer | $6.40 | |
| #71-0 WATER OUTLET | Water Outlet Only, Brass with Nylon Washer & 10-32 nut | $3.37 | |
| OCTURA SCREWS & NUTS | |||
| 6-32 SOCKET | HEAD SET PKT 9 | $2.66 | |
| 8-32 SOCKET | HEAD SET PKT 9 | $2.66 | |
| 10-32 SOCKET | HEAD SET PKT 9 | $2.66 | |
| 6-32T NUTS & | SCREWS | $2.77 | |
| 8-32 T NUTS & | SCREWS | $2.93 | |
| 10-32 T NUTS & | SCREWS | $3.22 | |
| 10-32 BUTTON | HEAD BOLTS | $2.66 | |
| ASSTD NYLON | BREAKAWAY BLT PKT/ 4 | 6-32, 10-32, 8-32 | $2.66 |
| OC6SC SHAFT | COLLARS | 3/16" | $4.73 |
| HWALL SOCKET | HEAD WRNCH | Set of seven Hex Wrenches | $11.25 |
| #2 ANTENNA | MOUNT | $6.64 | |
| OC9200 AUTO | BAILERS | $15.93 | |
| OC9100 COWL | LATCHES | $12.44 |