MARINE SPECIALITIES
 | Prices incl GST | |
| TFDS106 | Double Skeg Turn Fin - Small (1 3/8" deep) | $14.93 |
| TFDS110 | Double Skeg Turn Fin - Large (1 5/8" deep) | $14.93 |
| 1016CA1530-6 | 1.0" Long Control Arm for 3/16" Diameter Shaft | $12.29 |
| 1017 ca15-6 | 1.5" Long Control Arm for 3/16" Diameter Shaft | $10.21 |
| 1020 small electric | 1AR Straight Rudder Assy. 3 1/4" Long W/O Pick up | $29.90 |
| RATF410 | 2AR Tapered Rudder Assy. 4 5/8" Long | $32.51 |
| RATFS02 | 3AR Tapered Rudder Assy. 5 1/8" Long w/p on rear | $32.51 |
| RATS410 | Safety Shear Tapered Rudder Assy. 4 5/8" Long | $37.13 |
| RATS502 | Safety Shear Tapered Rudder Assy. 5 1/8" Long | $37.13 |
| RA-SPIN | Shear Pins for Safety Shear Rudder 6p/pkt | $4.05 |
| RATF410-SWP | 2AR Tapered Rudder Assy. 4 5/8" Long, with Side Water Pickup | $45.68 |
| RATF502-SWP | 3AR Tapered Rudder Assy. 5 1/8" Long, with Side Water Pickup | $45.68 |
| VOA312MP | VOA-40M Variable Outdrive Assy, 3 3/4" Long Rudder (.40 Size Mono | $56.81 |
| PS1063 | 3/16" Dia. - 3 1/8" Long, Bored for 5/32" Dia. Cable, thd. #10-32 x 1/2", (Stainless Steel) | $12.20 |
| PS1067 | 3/16" Dia. - 3 1/8" Long, with Drive Pin, & Bored for 5/32" Cable, thd. #10-32 x 1/2", (Stainless Steel) | $12.20 |
| PS1069 | 3/16" x 7/32" Dia. - 3 9/16" Long, Bored for 3/16" Dia. Cable, thd. #10-32 x 1/2", (Stainless Steel) | $12.20 |
| WPCA | Clamping Water Pickup Assembly | $11.81 |
| 1101 | Water Pickup Tube, 3/16" O.D. x 3 1/2" Long, Curved, Thd. 10-32 x 2", w/2 nuts | $6.08 |
| B-OSB6-0808 | Oilite Sleeve Bearing 3/16" I.D. x 1/4" O.D. x 1/4" Lg. 2p/pkt | $6.75 |
| B-OSB6-08-16 | Oilite Sleeve Bearing 3/16" I.D. x 1/4" O.D. x 1/2" Lg. 2p/pkt | $6.75 |
| B-0SB10-12 | Oilite Sleeve Bearing 3/16" I.D. x 5/16" O.D. x 3/8" Lg.2/pkt | $6.75 |
| B-OSB8-10-16 | Oilite Sleeve Bearing 1/4" I.D. x 5/16" O.D. x 1/2" Lg. | $6.75 |
| BTFB7-10-16 | Teflon Flange Bearing 7/32" I.D. x 5/16" O.D. x 1/2" Long 2/pkt | $6.75 |
| B-TSB6-08-12 | Teflon Sleeve Bearing 3/16" I.D. x 1/4" O.D. x 3/8" Long 2/pkt | $6.75 |
| B-TSB7-10-12 | Teflon Sleeve Bearing 7/32" I.D. x 5/16" O.D. x 3/8" Long 2/pkt | $6.75 |
| BR1220 | Pivot Bracket for 410 and 502 Rudders | $6.75 |
| 1229 | Safety Shear Rudder, 5 1/8" Long, (.60 size), assy. with head w/o wp | $34.25 |
| SBMP-65 | VOA Monoplane Strut, with 3/16" Sleeve bearings | $16.88 |
| SBHP-65 | VOA Hydroplane Strut, with 3/16" Sleeve bearings | $16.88 |
| SBMR-6S | Mid Range Strut, with 3/16" Sleeve bearings | $20.25 |
| SMALL DECALS | $3.50 | |
| BR1223 | HBR Pivot Bracket, 'C' Shaped | $9.00 |
| BR1221 | Tee Bracket | $9.00 |
| SBFR-6F | Full Range Strut, | $29.25 |
| BR1224 | $31.50 | |
| SOB 200 ANGLE | HBR Stand Off Bracket, 2" Long, Straight | $56.25 |
| EACS12 | Big Bore Carburetor Snozzler 3/4" Bore, fits all Walbro Carburetors | $38.25 |
|
